Conformal Coat Pallets

Conformal Coat Pallet Data Sheet.pdf

AGI's conformal coat pallets are made to provide a tool that is easy to keep clean and provide value with added functions such as masking to lower your your costs. Incorporating a Top Canopy, we can mask Connectors and Pins, Components, and Keep Out Zones, reducing labor, scrap and touch up. We recommend machining these from Aluminum and either leaving bare, or add Hard Anodize or Green Teflon Coatings. To reduce clean up, we typically touch the PCB in only the corners and pull away from the the PCB about 3/8" to allow for overspray.

Features and Benefits

Conveyor Fingers and PCB centered within the pallet for Flip Operation, same 'Z' height.
Our design typically touches the PCB in just the four corners to minimize transferring coating on the PCB.
Pallet pulls away from the product about 3/8'' to allow for overspray.
For low cost, we can 'machine in' the PCB locating pins from the aluminum for registration.
For high volume, or serviceability, we offer Bolt in Place SS pins.
AGI offers an optional "Green Teflon" Coating, baked on for a long life and easy clean up.

Adjustable Conformal Coat Pallets

AGI also offers Adjustable Conformal Coat Pallets! Our Standard Sizes include:

- 14” x 16” which can accommodate a PCB up to 10” x 12”

- 18” x 18” which can accommodate a PCB up to 14” x 14” Other advantages include:

Board hold-downs will accommodate a .031"- .093'' thick PCB.
One-piece construction eliminates Seams, Racking, and Loosening in corners.
Rails feature AGI's unique adjustable sliding PCB Support Blocks
Sliding design allows the user to position the hold-downs anywhere along the PCB edge.
PCB support edges are .062" wide.
AGI's step cut allows connectors to overhang the PCB edge up to 3/8''.